“Invasive species” are plants, animals or pathogens that are introduced, either intentionally or accidentally, to an area where they are non-native, and have negative environmental effects. Invasive species, which can be found in both aquatic and terrestrial ecosystems, often spread quickly because it they are able to adapt to a variety of habitat conditions and often lack the natural control of predators.
Non-native species can sometimes coexist with native species without becoming invasive but non-native species often become invasive when they overwhelm or push native species out of their habitat. Loss of native species, on both a small or large scale, can upset the natural balance of an ecosystem and reduces the biodiversity of the area. In some cases, invasive plant species can reduce biodiversity so drastically that they create a monotypic community, where the invasive is the only plant species that grows.
Although species introductions and range expansions have occurred throughout history, human activity has accelerated the long-distance transport of non-native species. Non-native plants are sometimes brought into a new area, intentionally, for ornamental purposes or for medicinal uses. Aquatic invasive species are often released to new areas in hopes of creating new fishing opportunities or releasing unwanted pets. Invasive species of plants and animals are also unintentionally transported, accidentally, on the bottoms of ships, in packing materials or through recreational activities such as ﬁshing, boating, hiking and camping.
Emerald Ash Borer is an invasive beetle that was first discovered in Ontario in 2002, and has since spread to Manitoba, Quebec, Nova Scotia and New Brunswick, and killed millions of trees across the country. Emerald Ash Borer lay their eggs in the bark of Ash trees. When the larvae are hatched, they tunnel their way under the bark and feed on the inner bark, which creates an “S” shaped pattern. This damage cuts off the flow of water and nutrients to the tree, and eventually kills the tree.
The eradication of Emerald Ash Borer is no longer deemed practical in Canada. Insecticide treatments can be injected into ash trees to protect them from Emerald Ash Borer, but these treatments need to be applied for the entire life of the tree. Instead, management efforts are focused on slowing the spread and preventing it from entering areas that are currently unaffected.
Emerald Ash Borer is expected to decimate ash tree populations in the next decade, which will have significant economic and environmental impact. Dead ash trees can pose a safety risk to people, trails, roads, buildings, hyrdo lines and other infrastructure. As a result of this risk, Conservation Halton is in the process of removing around 100,000 trees infested with Emerald Ash Borer from our properties, so that they don’t hurt anyone or damage anything.
What can you do to help?
- Learn how to identify the Emerald Ash Borer species, signs and symptoms
- Monitor ash trees on your property for signs of Emerald Ash Borer
- If there is Emerald Ash Borer in your area, consider treating your Ash trees
- Report sightings of Emerald Ash Borer to Canadian Food Inspection Agency
- Do not move firewood from one area to another—buy it where you burn it!
Spongy Moth (formerly known as European Gypsy Moth) was first detected in Ontario in the late 1960s, but it did not become widespread until the early 1980s, and is currently spread throughout North-Eastern United States and Eastern Canada, including Ontario, Quebec, New Brunswick, Prince Edward Island and Nova Scotia. The caterpillars of Spongy Moth feed on the foliage of more than 300 plant species. They prefer Oak trees, but also favour Maple, Birch, Poplar, Elm, and Spruce trees. Though it is not likely to kill a healthy, mature tree after one infestation, repeat “defoliation” can weaken a tree, so that it is more vulnerable to disease and damage, and eventually kill the tree within a couple of years.
What can you do to help?
Egg Mass Scraping (August to early May): Scrape the tan-coloured, oval-shaped egg masses off of the tree and directly into a bucket filled with soapy water. Seal the bucket and let it sit for two days to kill the eggs. The contents of the bucket can be discarded into the garbage. (Please note that scrapping egg masses onto the ground does not kill them.)
Tree Trunk Wrapping (May to June): Take a wide strip of burlap and wrap it around the trunk of the tree. Tie a piece of string around the middle of the burlap, and fold the top half of the burlap down over the bottom half. Caterpillar of the Spongy Moth will gather under the burlap in search of shelter during the day. As often as possible, remove the caterpillars, place them into a bucket with soapy water, seal the bucket for two days and discard the contentsdis into the garbage.
Hand Picking (May to July): The caterpillars and pupa of Spongy Moth can be picked from trees or other surfaces and placed in a bucket with soapy water. Seal the bucket for two days, and then discard the contents of the bucket into the garbage. If you remove caterpillars by hand, it is important to wear gloves because their hairs can cause skin irritation.
Spraying Btk (May to June): Btk (Bacillus thuringiensis kurstaki) is a naturally occurring bacterium found in soil, which can be used as a biopesticide for Spongy Moth, with no known toxic effects on humans, other mammals, plants, birds, fish, or other beneficial insects. Btk is sprayed onto the leaves of affected trees, and when the caterpillars ingest the treated leaves, their gut is paralyzed, they immediately stop feeding and die within one to five days. (Please note that Btk must be applied when the Spongy Moth larvae are very young as older larvae have a better chance of resisting the effects of Btk.)
What are we doing about Spongy Moth?
Conservation Halton staff monitor for Spongy Moth every fall, and if the projected numbers for an area are estimated to reach damaging levels, it is recommended to apply Btk in the area of concern. Application of Btk only occurs when moth larvae are feeding (mid May to early June), and this timeline for application is very small to avoid harming other beneficial species.
Giant Hogweed is an invasive perennial plant that usually grows from 2.5 to 4 metres (8 to 14 feet) high with leaves up to 1 metre (3 feet) in breadth. It has a thick, hollow stem, which is covered in coarse hairs. Its large, umbrella-shaped flowers are white in colour and can be more than 30 centimetres (1 foot) in diameter. Giant Hogweed is most often found in floodplains around creeks, streams and rivers, as the plant prefers moist soil.
Giant Hogweed has two major negative impacts: First, due to its invasive nature, Giant Hogwood poses a threat to biodiversity. Second, the plant produces a noxious sap that causes a skin reaction known as photosensitivity, which can result in severe and painful burning and blistering.
What can you do to help?
If you find Giant Hogweed on your property, it is important to make sure it isn’t a native “lookalike” species, such as Cow Parsnip, Purple-Stemmed Angelica, Spotted Waterhemlock, Poison Hemlock or Wild Parsnip. Once you have confirmed the species, plants can be dug out, making sure to remove the entire root, placed into a black trash bag, left in the sun for three to four weeks, and discarded with the garbage.
If is important to wear proper clothing (long sleeves, high shoes, gloves, face and eye protection) when you are in contact with Giant Hogweed. If skin contact does occur, the area should be washed immediately with soap and cold water. Since the sap increases the photosensitivity of the skin, you should to avoid exposure to the sun for at least 48 hours after contact.
Dog-Strangling Vine is an invasive perennial plant that was introduced to North America from southern Europe as a garden ornamental in the late 1800s. Since that time, the plant has spread throughout urban areas in Southern Ontario, and more recently, it has spread into more rural and natural environments. Dog-Strangling Vine is known to crowd and strangle native plant species, making it a threat to biodiversity.
There are a number of species that can be referred to as Dog-Strangling Vine, but Black Swallowwort is the most common. This species has oval leaves with pointed tips, and small, star-shaped flowers with five dark purple leaves. Another species, Pale Swallowwort, is almost identical to Black Swallowwort but its flowers are lighter in colour, ranging from pale purple to reddish purple.
What can you do to help?
Dog-Strangling Vine can be difficult to eradicate but manual removal is known to be the most effective method. Plants can be dug out, making sure to remove the entire root, placed into a black trash bag, left in the sun for three to four weeks, and discarded with the garbage. In order for this method to be most effective, it is important to be thorough in removing each of the plants in their entirety.
Periwinkle is an invasive plant that is often sold in nurseries as groundcover for “problem areas” in gardens due to its ease of growth. As a groundcover plant, Periwinkle has a long, thing stem that can grow 1 to 2 metres in length but will not grow more than 20 to 70 centimetres above ground. This plant has dark, shiny leaves and purple flowers with five petals that appear in early spring. Periwinkle prefers moisture and shade, but can grow in many habitats. Unfortunately, as a result, Periwinkle is known to spread throughout large areas and smother native plant species, which poses a threat to biodiversity.
What can you do to help?
Periwinkle can be dug out, making sure to remove the entire root, placed into a black trash bag, left in the sun for three to four weeks, and discarded with the garbage. The most effective way to prevent the spread of Periwinkle is to not plant it in the first place! Instead, there are many groundcover alternatives to Periwinkle that are not invasive: Bunchberry, Dwarf Raspberry and Wild Ginger are great for damp, shaded areas, and Wild Thyme, Wild Strawberry and Ostrich Fern are great for dry, sunny areas.
If you see an invasive species, you can send a report to the province-wide Early Detection and Rapid Response Network or iNaturalist. If you find an invasive species on Conservation Halton property, you can report your sighting to us at firstname.lastname@example.org.